Hydraulic Pumps

We are renowned stockiest of original Denison pumps & all spares. Our range of Denison Hydraulics Vane pumps & Cartridge kits include Single, Double & Triple Vane pumps. Denison hydraulic pumps are available in various models that include T6C, T6D, T6E, T6CC, T6DC, T6EC, T6ED, T7 series and T6DCC. In addition to it we also provide cartridge kits, shafts, seal kits and the complete pump unit is available in ex stock.

Cartridge Kits for Vane Pumps

We are stockiest of cartridge kits for servicing Vickers Denison Pumps.We offer imported Vickers equivalent cartridge Kits & original denison cartridges kits for Mobile & Industrial applications. The vane design with self compensation for wear and clearances make volumetric efficiency of pump nearly constant over service life. The intervene design of the vane pump keeps the vanes in constant contact with the cam ring. Even at higher speeds & pressures this self compensating vane tip wear feature provides high performance over life of the pump. Cartridge kits are the primary way to service the pumps to restore the pump performance, lower the replacement cost and reduce downtime. Cartridge Kits of Vickers 20V/VQ(5,8,11,12,14 GPM),25V/VQ (12,14,17,21 GPM),35V/VQ (25,30,35,38 GPM) & 45V/VQ(42,50,60 GPM) series are used to service single & double Vickers vane pumps of series 2520V,3525V,4525V,3520V,4520V etc.The cartridge kit is independent of the shaft allowing for easy change of flow capacity and field servicing without removing the pumps from its mounting.

S.M.Shah & Co presents Hydraulic Gear Pumps with displacements of 0.8cm³/rev to153 cm³/rev made using high quality aluminum & conforming to SAE-BIS and DIN Standards. These pumps are available in wide variety of mounting flanges with two & four bolt mountings for easy installation. Direct drive is advisable between the gear pump & the prime mover using a coupling which will allow self alignment of shaft. The pump suction line should be large & free from sharp bends to prevent excessive suction head. A relief valve should be provided to pump outlet so that working pressure of pump is controlled. The reservoir capacity for industrial applications should be three to five times the open loop flow per minute being drawn from the reservoir. For mobile applications, the reservoir should be sized for not less than 0.75 times the open loop flow .The volume for rams and actuators must be allowed for by providing adequate air space and breathing. Mineral oil based hydraulic fluids are selected as per the requirements of temperature during operation. High tensile aluminum alloy bodies are used throughout the range to ensure uniformity in material properties and maximum fatigue strength. The applications of these pumps include agriculture tractors, construction equipments, material handling equipment, earth moving equipment, mining, drilling equipment & road paving.

We are the leading supplier of Hydraulic Piston Pump Parts in India. Our hydraulic piston pumps spares are made using prime quality material and thus have high durability. There are Rexroth, Kawasaki and other major world brands manufacturing hydraulic piston pump parts but we ensure our clients with best quality hydraulic piston pump parts at reasonable prices. Our hydraulic piston parts include cylinder block, valve plate, drive shaft, piston shoe & other.